Air monitoring data and technical reports
Overview
The CDPHE Air Pollution Control Division collects air monitoring data across Colorado and prepares related technical reports. This information supports the division’s mission to protect air quality through the development and implementation of cost-effective and efficient air pollution control measures that are consistent with the requirements of state and federal law.
This page lists the division’s technical documents, including network reviews and plans, special studies, and annual data reports. This page also covers Standard Operating Procedures the division uses to qualify its air monitoring data.
- EPA Completeness Determination letter for the 2018 DM/NFR, Alamosa, and Prowers Mitigation Plans.
- DM/NFR Mitigation Plan 2018.
- Alamosa Mitigation Plan 2018.
- Prowers Mitigation Plan 2018.
- Grand Junction Blowing Dust Climatology.
- Lamar Natural Events Action Plan 2012.
- Lamar Blowing Dust Climatology 2010.
- An Evaluation of Federal Land Manager Activities that may Impact Air Quality Related Values in Class I Areas.
- Data Validation Standard Operating Procedures and Templates.
- Appendix D1 SOP for the Collection of Ambient Air Quality Data.
- Appendix D2 SOP for the Processing and Verification of Gaseous and Meteorological Data.
- Appendix D3 SOP for the Data Management Operations of Filter Based Particulate Data.
- Appendix D4 SOP for Precision & Accuracy Data Processing, Quarterly Data Validation, Verification, and Annual Data Certification.
- Appendix D5 SOP for Generating QA Data Strings for AQS.
- Appendix D6 SOP for EPA’s Air Quality Systems.
- Appendix DQ Data Qualifiers.
- Appendix MQO Measurement Quality Objectives and Acceptance Criteria Validation Templates.
- Gaseous and Meteorological Monitoring Standard Operating Procedures.
- Appendix GM1 SOP for the Operation of Gaseous and Meteorological Monitoring Shelters.
- Appendix GM2 SOP for Gas Analyzer Calibrations.
- Appendix GM3 SOP for the Determination of Ozone in Ambient Air - 2BTech Analyzers.
- Appendix GM4 SOP for the Dynamic Dilution Calibrator And Zero Air Generator.
- Appendix GM5 SOP for Meteorological Monitoring.
- Appendix GM5A SOP for Meteorological Monitoring with a Mobile Tower.
- Appendix GM6 SOP for Gas Cylinder Verification.
- Appendix GM7 SOP for the OPTEC LPV-2 Transmissometer.
- Appendix GM8 SOP for the OPTEC NGN-2 Nephelometer.
- Appendix GM9 SOP for the Remote High-Resolution Digital Camera System (Currently Under Revision).
- Appendix GM10 SOP for the Determination of Toxic Organic Compounds in Ambient Air.
- Appendix GM11 SOP for Operation and Maintenance of a Ceilometer (PAMS) (Currently Under Development).
- Appendix GM12 SOP for Carbonyls Measurements (PAMS) (Currently Under Development).
- Appendix GM13 SOP for Operation and Maintenance of a Gas Chromatograph (PAMS) (Currently Under Development).
- Appendix GM14 SOP for Solar Radiation Measurements (PAMS) (Currently Under Development).
- Appendix GM15 SOP for Method Detection Limit (MDL) Determination.
- Particulate Matter Standard Operating Procedures.
- Appendix PM1 SOP for Monitoring PM10 in Ambient Air Using a High Volume Sampler.
- Appendix PM2 SOP for Operation and Maintenance of the Low Volume Filter Based PM2.5 and PM10 Particulate Samplers.
- Appendix PM3 SOP for the Determination of Particulate Matter in Ambient Air Using a TEOM.
- Appendix PM4 SOP For The Determination Of PM10 And PM25 In Ambient Air Using A GRIMM EDM 180.
- Appendix PM5 SOP for the Chemical Speciation Network (CSN) – URG 3000N.
- Appendix PM6 SOP for the Chemical Speciation Network (CSN) - SASS And SUPERSASS.
- Appendix PM7 SOP for the Operation of the TAPI Model 633 Aethalometer.
- Appendix PM8 SOP for the Operation of the TAPI Model T640 Particulate Monitor.
- Quality Assurance Standard Operating Procedures.
- QAPP-Specific Standard Operating Procedures.
Contact us
For more information, view the Air Quality Monitoring, Forecasts and Data web page.